Feeds:
Posts
Comments

Posts Tagged ‘System’

Ubuntu has moved on to “Unity“, and Gnome has evolved to version 3‘s “Gnome Shell“, but many people (like myself) still prefer to use the old “Classic” desktop – be it the old Gnome 2 version, or the “Fallback Mode” of Gnome 3 (users of 11.10 upwards have no choice but to use the Gnome 3 version).

While the 2 versions of the “Classic” interface do have some differences – no “System” menu in Gnome 3 (read this if this is your only concern), and having to hold Alt while right-clicking it to access options – both have panels that are much more customisable (and infinitely more useful) than what “Unity” and “Gnome Shell” currently offer.

But things can go awry, like after doing some tweaking, or installing a program, or having to do a hard reboot, and you can find your panel altered (particularly minus the menus), or even completely missing. So we’ll look at a few different scenarios, and how to rectify them, including how to force Gnome to reset your menus back to their defaults (which is probably the quickest and easiest method). Also, because I’ve seen a lot of newbies in forums say “My Applications menu is missing!” when they should be saying “My top panel has totally vanished!”, we’ll look at how to get your panel back as well.

Finally, because some will need to take a harder approach (or just prefer an easier one), we’ll look at how to totally reset your panels back to their defaults. This is by far the most drastic measure, but it’s quick and easy, and for most people there are no customisations to worry about losing. Besides, if your panel has totally died or vanished, and nothing else you’ve tried has worked, then it’s the only option left.

Try A Quick Panel Restart:

First off, it might be enough to simply refresh the panel by forcing it to close then re-open, which can be done by a reboot, or logging out, or simply entering the following command into the terminal or via Alt+F2:

killall gnome-panel

It pays to do that first, in case that’s all that’s really needed, but chances are you’ve already tried logging out or rebooting, so check out the following tips.

Restore Missing Menus to Panel:

If just your main menu (the “Applications” and “Places” menus, and the “System” menu in Gnome 2) is missing, then perhaps all you need to do is add the menu back to your panel. Right-click an empty area of your panel (holding Alt in Gnome 3) and choose “Add to Panel…“, then scroll down till you find “Menu Bar” (ignore “Main Menu“, as that is a small icon version), and drag it to the left area of your panel.

If it’s conceivable that you perhaps accidentally right-clicked the menu and hit “Remove From Panel“, then it might pay to do this, especially if you have panel customisations you don’t want to lose.

Force Reset of Main Menus:

If you can’t add the menus back to your panel, for example you can’t invoke “Add to Panel…” with a right-click, it’s time to reset the menus to their defaults, which is done by deleting some configuration files. Actually, technically you’re not deleting anything, as the 2 files in question are simply renamed with .bak extensions [so they’re still there if you really need them later], forcing Gnome to recreate those files with default values.

To force Gnome to rewrite its panel menus with default values, enter the following command into a terminal:

mv ~/.config/menus/applications.menu ~/.config/menus/applications.menu.bak && mv ~/.config/menus/settings.menu ~/.config/menus/settings.menu.bak

(That should work with either Gnome 2 or 3, though the settings menu part of it probably won’t do anything in Gnome 3).

All you have to do now is log out, then once you log back in again, your panel should be back with all its menus. Or you can simply enter killall gnome-panel into the terminal and it should successfully refresh your panels without having to log out.

Make a New Top Panel if Missing:

If your panel is absent, you could have even accidentally deleted it yourself, if you unwittingly right-clicked the panel and chose “Delete This Panel” (in Gnome 2 – in Gnome 3 that is harder to do, since you need to be holding Alt while right-clicking the panel). But don’t immediately blame yourself, as all sorts of mishaps can result in a missing panel.

Whatever the case, you should be able to recreate your top panel simply by right-clicking the bottom panel (while holding Alt in Gnome 3) and choosing “New Panel“. You’d then move it to the top, then right-click it (holding Alt in Gnome 3) and choose “Add to Panel…” to add back all the various bits and pieces you had before (the “default” panel is actually a blank panel with a bunch of plugins added).

Obviously, this would be the most time-consuming method, but if you plan to customise your panel anyway, you may as well start from scratch. However, the easiest method would be to totally reset your panels, so keep reading.

Force A Complete Panel Reset:

When all else fails, it’s time to force Gnome to completely reset your panels, which is done by deleting the configuration files. That might sound drastic, and in reality this really is the last resort, but if your panel is totally messed up, chances are your old settings are useless anyway, or rather that having to stick some launchers back on a clean panel will be a welcome alternative to having no panel, or one that is buggy, or missing the “Applications” menu or whatever.

To force Gnome to recreate its panels with default values, enter the following commands into a terminal:

gconftool --recursive-unset /apps/panel (This wipes the panel’s settings)

rm -rf ~/.gconf/apps/panel (This deletes the panel’s folders and files)

killall gnome-panel (This forces the panel to close and restart)

Your panel should now be back with all its menus (but of course minus any customisations). If for some reason they don’t appear immediately, a reboot should fix it.

Alternative Commands for Panel Reset:

ΔΔΔ Some guides have gconftool-2 --shutdown as the first command (this shuts down the current user’s gconfd), though gconftool --recursive-unset /apps/panel should work perfectly fine without it. However, if you aren’t having success, then run it first.

ΔΔΔ If you’re running the commands via the Alt+F2 Run Application box, chances are it won’t like the tilde (~) in the second command, so use rm -rf $HOME/.gconf/apps/panel instead.

ΔΔΔ Instead of killall gnome-panel, you can use pkill gnome-panel (which is basically the same thing), or nohup gnome-panel --replace &, or nohup gnome-panel --replace </dev/null &>/dev/null & (note that nohup specifies the command not halt when the terminal is closed, so is not needed if using Alt+F2).

ΔΔΔ If you’d rather make a backup of the panel’s files before deleting them, run mv ~/.gconf/apps/panel ~/Settings/PanelBackup (note the second path can be whatever you want; in this case, it’s a folder called PanelBackup inside a Settings folder within my home folder I have for storing various config files and settings backup). It actually moves the whole folder to a new location, which is basically the same as deleting it, so you shouldn’t need to run the second command (since there is nothing left there to delete, anyway).

☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻

Did this information make your day? Did it rescue you from hours of headache? Then please consider making a donation via PayPal, to buy me a donut, beer, or some fish’n’chips for my time and effort! Many thanks!

Buy Ubuntu Genius a Beer to say Thanks!

Advertisements

Read Full Post »

If you’ve upgraded your Ubuntu system to 11.10, or have a fresh install, you might find that when you right-click a USB drive and choose “Safely Remove Drive” in the left pane in Nautilus, the system hangs. This appears to affect some users of the Linux kernel 3.0.0-12, which at this early stage would be what most users have, so if this applies to you, it should be easy enough to fix.

Go to http://people.canonical.com/~ogasawara/lp844957/ and into the folder for your architecture (i386 or amd64). Install the 3 .debs located therein (I did so with GDebi, but should be the same in Ubuntu Software Centre, just slower), and reboot. You should now be able to successfully remove the drive without issue the next time you connect it.

NOTE: What you’re actually doing here is replacing the 3 main kernel packages, but for me and a bunch of others affected, there were no issues, with kernel 3.0.0-13 replacing the old one in GRUB, booting into Ubuntu just fine, and resolving the freezing issue when trying to remove USB drives.

Do not use this if your kernel is a later version (i.e. higher than 3.0.0-13). It probably wouldn’t kill your system, but reverting to an earlier kernel is extreme measures, so try find a more current and applicable solution (this fix appeared within days, so it does pay to spend a few minutes looking around the web, especially the Ubuntu Forums).

☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻

Did this information make your day? Did it rescue you from hours of headache? Then please consider making a donation via PayPal, to buy me a donut, beer, or some fish’n’chips for my time and effort! Many thanks!

Buy Ubuntu Genius a Beer to say Thanks!

Read Full Post »

While Ubuntu‘s new Unity interface has been designed for less clutter, and generally makes getting to common tasks a breeze, many have found navigating through the rest a bit of a nightmare. While everything is supposed to be more simplified, some would argue having all your launchers accessible via categories in the old Applications menu was actually simpler and quicker.

But you can actually have the best of both worlds, so if you’re avoiding Unity and using the Classic Desktop simply for access to the Applications and System (or Wine) menus, read ahead.

While you can’t actually add the old menu system to the Unity panel, since it is not gnome-panel that is running, there is actually an “indicator” available for Unity that will do the same thing. So while this new (or old?) menu won’t replace Unity‘s “Dash“, you will see an Ubuntu icon in your system tray’s notification area. Click that, and you will see the old familiar Applications menu, with all the categories you’re used to.

To install Classic Menu Indicator, enter the following commands in sequence in a terminal:

sudo add-apt-repository ppa:diesch/testing

sudo apt-get update

sudo apt-get install classicmenu-indicator

Once installed, hit Alt+F2 and enter classicmenu-indicator as the command to run.

Apart from easy access to all your launchers, you’ll find your old System menu is there too, split into the familiar Preferences and Administration sub-menus.

More importantly for many, you will also have your old Wine menu back for running Windows programs. Unity‘s Dash menu system does not currently show a Wine section, and finding those apps can be near-impossible, but classicmenu-indicator will rectify this.

If you find that this menu/indicator does not automatically run upon your next boot (which it should), simply add classicmenu-indicator to your Startup Applications, and it will be forced to load from then onwards (it should already be in there, so check it isn’t disabled).

☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻

Did this information make your day? Did it rescue you from hours of headache? Then please consider making a donation via PayPal, to buy me a donut, beer, or some fish’n’chips for my time and effort! Many thanks!

Buy Ubuntu Genius a Beer to say Thanks!

Read Full Post »

In Ubuntu 11.04‘s new Unity desktop, you may have noticed that the clock in the panel’s system tray only shows the time, whereas before you may have been used to it showing the day and date as well. But this is actually very simple to remedy: just click the clock, and when the calendar/menu appears, click Time & Date Settings… at the bottom.

When the settings app appears, in the Clock tab you will see you can customise it in all sorts of ways. If you would simply like to show the date, just check Date and month, and it will immediately appear.

If you’d also like to add the day, check Weekday as well. You’ll also be able to choose to show Seconds, or change the time display mode to 24-hour time.

 

☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻

Did this information make your day? Did it rescue you from hours of headache? Then please consider making a donation via PayPal, to buy me a donut, beer, or some fish’n’chips for my time and effort! Many thanks!

Buy Ubuntu Genius a Beer to say Thanks!

Read Full Post »

If you upgraded to Ubuntu 11.04 (or installed a fresh Natty Narwhal system) and are running the Classic desktop, you may find something amiss with the ability to bring folder windows or programs to the foreground by holding an item over its taskbar button until it appears.

For example, you’re looking in a folder at a sound file you downloaded, and wish to play it in Banshee, which is already open but hidden from view. Normally, you would drag the file over the Banshee taskbar button in the bottom panel, wait till Banshee appears, then drop the file onto it.

A more common use is perhaps file management, when you’re dragging files and folders from one Nautilus window to another which is hidden from view. This is most handy, as it means you don’t need to carefully line up both source and destination folders before doing the drag-and-dropping.

But you may find something is preventing you from doing this, with the only thing happening is a + sign appearing, and if you finally let go on the panel instead of press the Esc key, a launcher will be created there, which you then have to remove. This is not some new setting you can change in Nautilus‘s preferences (which is evident if you try with another file manager like Thunar), but a Compiz bug. While that obviously needs to be ironed out, there is a way around this, which is to run the following command in a terminal:

compiz --replace

Note that the next time you restart, things will be back as before, but at least you can just run that command again (which you can easily do by hitting the up arrow when in the terminal, or pick from the menu in the Run dialogue via Alt+F2).

Also note that if you try adding that command to your startup programs, it will likely do nothing, but you can always make a launcher for your panel, which you can then click once everything has loaded, or when you go to drag stuff via the taskbar and remember you need to.

This bug will likely be fixed soon enough, but at least there is a way around it for now. If you’d like to add your voice to the bug report (since more voices mean quicker action), click here (note that if you haven’t already got a Launchpad account, it only takes a couple of minutes to join, and is worth the small effort, since you can then report your own bugs).

ΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘΘ

Can’t get the Run Application dialog to appear when you hit Alt+F2?

☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻☻

Did this information make your day? Did it rescue you from hours of headache? Then please consider making a donation via PayPal, to buy me a donut, beer, or some fish’n’chips for my time and effort! Many thanks!

Buy Ubuntu Genius a Beer to say Thanks!

Read Full Post »

Older Posts »